Heated Flame Ionization Detection (FID) Analyzer

Graphite 52M

One of the sole QAL 1 certified FID analyzers on the market, also available in a transportable version for the measurement of: THC or simultaneous THC, nmHC & CH4

Utilizes Flame Ionization Detection (FID), the most sensitive and widely used technology for the measurement of: Total hydrocarbons (THC) / Non-methanic Hydrocarbons (NmHC) / Methane (CH4)
• Available in 2 versions:
GRAPHITE 52M-S : THC monitoring
GRAPHITE 52M-D : THC, NmVOC & CH4 simultaneous monitoring

  • All elements in contact with the sample from its extraction to the analysis are heated
  • Adapted for checking the efficiency of a treatment process (upstream / downstream)
  • Integrated zero air generator with catalyzer
  • Up to 191°C heated detector for high concentration HC measurement
  • Fuel used: mixture of H2 & He or pure H2 (optional)
  • Fast response time, perfectly suited for wet and corrosive sample measurements
  • High accuracy, sensitivity and stability
  • User adjustable response time and averaging time
  • Real time calibration graph
  • High efficiency long-life catalyst
  • Internal zero and air scrubber
  • Graphic LCD Display with interactive menu driven software and enhanced speed display
  • AK protocol communication (RS232 / RJ45), built-in Ethernet TCP/IP connection, USB port for remote control and serial interface RS 232
  • Complies with EN 12619 & EN 13 526 standards for emissions monitoring and CFR 40 1065 (US EPA) for engine emission testing of hydrocarbons
  • Compliance & process monitoring
  • Engine exhaust gas & automotive emission testing
  • Stack Monitoring
  • Monitoring effluent of volatile organic compound (VOC) reduction equipment for:
    – Environmental compliance
    – Efficiency control of incinerators (Thermal or catalytic)
    – Scrubbers
    – Carbon absorbers
    – Monitoring of catalytic converters
    – Combustion and diesel engine efficiency
Measurable parameters
Pollutant Range
(ppb)
Product
code
CH4 0-10 / 10000
THC 0-10 / 10000
Lowest / Highest available ranges expressed in mg/m3 (may vary with your site conditions to be indicated on the Site Survey Form)
(*) Min/Max based on 100/200 Dilution Rate (other ranges & dilution rates available upon request)
Technical Specifications
QAL1 to EN 15267-3 certified YES
US EPA compliance YES
Sampling technology Hot/Wet Extraction
Sample transfert 180°C heated sampling line
back flush function YES
span injection YES on analyser or at sample point
Built-In O2 option NO
Serial link communication RS232 / RS422
Other Communication Ethernet
Analogue OUTPUTS Optional
Analogue INPUTS NO
Dimensions (mm) 19” rack: 483 x 470 x 177 (L x W x H)
    COMPLIANCE WITH IED 2010 APPLICATIONS

  • QAL 1 certified by the TÜV and the MCERTs to EN 15267-3
  • U.S. EPA approved as compliant with CFR 40-1065

Related products

  • Dusty

    Cost effective broken bag detection

    More
    10.00
  • Topaze 32M

    Single reaction chamber version for the monitoring of NO or NOx, or dual chamber for NO, NOx and NO2 measurements

    More
    10.00
  • LAS 300 XD

    In-situ & non-invasive measurement of NH3 & H2O, HCl & H2O, HF, low or high concentrations of CO and O2

    More
    10.00
  • PCME LEAK ALERT 75

    Stand alone TÜV approved filter dust leak monitor suited to the monitoring of filter emissions (0-100%) after bag houses, cartridge filters, cyclones etc

    More
    10.00

Compare up to 4 products Show

Le nouveau site d’ENVEA est actuellement en cours de développement, fermez cette fenêtre pour poursuivre votre navigation. Vous pouvez aussi retrouver l’intégralité des rubriques en cliquant sur le bouton ci-dessous.

The new ENVEA website is currently under development, close this window to proceed your navigation. You can also find all the sections by clicking on the button below.
ENVEA
close-link
This site uses cookies. By the further use you hereby agree. For detailed information, please refer to the Cookies. Ok