Heated Multi-Gas NDIR-GFC analyzer

MIR 9000H

Perfect ammonia gas analyzer or multi-gas analyzer for the measurement in hot & wet flue-gas of: HCl, HF, NH3, NO, NO2, N2O, SO2, CO, CO2, O2 and H2O.

Heated Multi-Gas NDIR-GFC analyzer for emission compliance and analysis of wet sample gases in corrosive applications, including DeNOx (SCR / SNCR) and for the optimization of flue gas treatment processes.

 

  • QAL 1 certified by the TÜV to EN 15267-3
  • QAL3 compliance as defined by EN 14181

 

Add to Compare
  • Temperature maintained at 180°C from the sampling point to the measurement cell for no sample loss or gas composition changes
  • Can be used to measure raw & purified flue gas for desulfurization / denitrification process control
  • Designed to measure wet and corrosive samples
  • Perfect analyzer for ammonia slip detection
  • Robust design with a stainless steel tight box enclosure to withstand industrial environments
  • No nitrogen required for calibration – can use clean & dry compressed air
  • QAL1 certified analyzer, offering very accurate measurements
  • Acquisition / management of peripherals measurements (particulates, temperature, flow…)
  • Embedded HMI with Graphic LCD display and interactive menu driven firmware, no computer required
  • Remote access for all analyzer functions (visualization/ maintenance / configuration / backup…..)
  • Optimized operation cost (low maintenance and low consumables requirement)
  • Ideal for process control in ammonia slip applications or NH3 leakage detection
  • Process Control as DeNOx (SNCR, SCR) or other flue gas treatments
  • Energy From Waste incineration (EFW) : Municipal, Hazardous, Industrial, Special, Hospital
  • Biomass
  • Power & Combustion
  • Cement Kilns
  • Pulp and Paper
  • Combustion control: industrial Boilers and Furnaces in Chemical & Petrochemical Plants, etc.

Application examples:

Measurable parameters
Pollutant Range
HCI 0-100 / 5000
HF 0-40 / 300
NO 0-200 / 5000
NO2 0-200 / 5000
NOx 0-200 / 5000
SO2 0-500 / 5000
CO 0-75 / 1000
NH3 0-15 / 500
H2O (%) 0-30 / 40
CO2(%) 0-10 / 100
O2(%) 0-10 / 25
Lowest / Highest available ranges expressed in mg/m3 (may vary with your site conditions to be indicated on the Site Survey Form)
Technical Specifications
QAL1 to EN 15267-3 certified YES
US EPA compliance YES
Sampling technology Hot/Wet Extraction
Sample transfert 180°C heated sampling line
back flush function YES
span injection YES on analyser or at sample point
Built-In O2 option YES
Serial link communication RS232 / RS422
Other Communication Ethernet
Analogue OUTPUTS YES (x 8)
Analogue INPUTS YES (x 4)
Dimensions (mm) Tight box: 710 x 560 x 300 (D x W x H)
    Complete system would normally comprise of:

  • Sample input
  • Heated multi-reflexion optical bench
  • Infrared beam
  • Mirrors
  • Correlation wheel
  • Interferential filter wheel
  • Sample output
    Compliance with MCP Directive, BREF Incineration, LCPD and WID applications

  • QAL 1 certified by the TÜV to EN 15267-3
  • QAL3 compliance as defined by EN 14181
  • U.S. EPA approved as compliant with 40 CFR 60 ET 75

Related products

Produits apparentés

Verwandte Produkte

Prodotti correlati

Productos relacionados

相关产品

Produtos relacionados

Сопутствующие товары

QUOTE DEVIS ANGEBOT OFFERTA COTIZACIÓN COTAÇÃO ЗАПРОС ЦЕНЫ CONTACT CONTACT KONTAKT CONTATTI CONTACTO CONTATO КОНТАКТЫ
Go to Top