In-situ Close-coupled Multi-Gas Analyzer

MIR IS

A complete “all in one compact” system, for multi-gas measurements, based on the field-proven MIR 9000 analyzer and on-board SEC sampling system

Fast & simultaneous measurement of up to 10 gases among: HCl, NO, NO₂ (NOx), SO₂, CO, CO₂, HC, CH₄ (TOC), HF, N₂O, O₂, at the sampling location
• Integrated sample drying & system conditioning; no sample line necessary

Robust analyzer with a stainless steel enclosure
Designed for measuring wet & corrosive samples
Ease of installation (single stack entry, on-stack or close-coupled) for reduced costs
Flow, Temperature & Pressure parameters (optional)
Remote control and display functions

Graphic LCD screen with real time synoptic
Intrinsic security with on-board residual H₂O measurement
On-board paramagnetic cell for long term O₂ measurement
Fast response time, with automatic cross interference correction
Robust and reliable short extractive analyzer with built-in permeation sample drying system for the measurement of wet and corrosive sample

Complete CEMS in one cabinet – combines infrared analyzer, sample conditioning
system and probe into one device
Highly accurate; excellent calibration stability with automatic optical check
Heated probe in different materials and lengths to suit the application
External signal input for up to 5 additional measurements (flow rate, pressure, gas temperature…) or any other analog input

Industrial Boilers and Furnaces, Chemical and Petrochemical Plants
Incineration, Co-generation, Gas Turbines, Power Plants

Process Control, Pre/post Scrubber Measurements

Coal / Oil / Gas Fired Combustion Monitoring
CHP Combustion Monitoring

Measurable parameters
Pollutant	Range (ppb)	Product code
HCI	0-15 / 5000	–
HF	0-20 / 300	–
NO	0-100 / 5000	–
NO₂	0-100 / 1000	–
N₂O	0-20 / 1000	–
NOx	0-200 / 5000	–
SO₂	0-75 / 5000	–
CO	0-75 / 5000	–
CH₄	0-10 / 1000	–
THC	0-50 / 5000	–
CO₂(%)	0-10 / 100	–
O₂(%)	0-10 / 25	–

Lowest / Highest available ranges expressed in mg/m3 (may vary with your site conditions to be indicated on the Site Survey Form)
(*) Min/Max based on 100/200 Dilution Rate (other ranges & dilution rates available upon request)

Technical Specifications
QAL1 to EN 15267-3 certified	YES
US EPA compliance	YES
Sampling technology	In-Situ
Sample transfert	N/A
back flush function	YES
span injection	YES at sample point
Built-In O₂ option	YES
Serial link communication	RS232 / RS422
Other Communication	Ethernet
Analogue OUTPUTS	YES (x 8)
Analogue INPUTS	YES (x 4)
Dimensions (mm)	SS Tight box: 200 x 600 x 600 (D x W x H)