Multi-Gas NDIR-GFC analyzer

MIR 9000

Offers excellent performance for multigas measurements in dry sampling, including HCl, HF, NO, NO2, N2O, SO2, CO, CH4, TOC, CO2 and O2.

Multi-Gas NDIR-GFC analyzer (Non-Dispersive Infrared Gas Filter Correlation) measuring up to ten gases simultaneously, including Nitrogen Oxide (NO), Nitrogen Dioxide (NO2), Sulphur Dioxide (SO2), Carbon Monoxide (CO), even Hydrogen Chloride (HCl) and Hydrogen Fluoride (HF).

  • Over 5 000 installations worldwide, covering various applications and industries
  • Designed to measure dry & corrosive samples
  • Fast & simultaneous measurements of up to 10 gases
  • Dry basis measurement
  • Automatic cross interference correction
  • Compatible with high performance drying technologies, such as the SECTM box
  • Intrinsic security with residual H2O measurement
  • On-board cell for O2 measurement
  • Available in 19’’ Rack or Tight box version
  • Municipal and Hazardous Waste Incinerators
  • Cogeneration, Gas Turbines (MIR 9000 with CLD option)
  • Industrial Boilers and Furnaces
  • Power & Combustion
  • Cement Kilns, Glass, Chemical & Petrochemical Plants
  • DeSOx unit process control (MIR 9000 with ASD option)
Measurable parameters
Pollutant Range
HCI 0-15 / 5000
HF 0-20 / 300
NO 0-100 / 5000
NO2 0-100 / 1000
N2O 0-20 / 1000
NOx 0-200 / 5000
SO2 0-75 / 5000
CO 0-75 / 1000
CH4 0-10 / 1000
THC 0-50 / 5000
CO2(%)d> 0-10 / 100
O2(%) 0-10 / 25
Lowest / Highest available ranges expressed in mg/m3 (may vary with your site conditions to be indicated on the Site Survey Form)
(*) Min/Max based on 100/200 Dilution Rate (other ranges & dilution rates available upon request)
Technical Specifications
QAL1 to EN 15267-3 certified YES
US EPA compliance YES
Sampling technology Cold/Dry Extraction
Sample transfert non heated polytube
back flush function YES
span injection YES on analyser or at sample point
Built-In O2 option YES
Serial link communication RS232 / RS422
Other Communication Ethernet
Analogue OUTPUTS Optional
Analogue INPUTS Optional
Dimensions (mm) • Tight box version: 200 x 400 x 600 (D x W x H)
• 19” rack version: 490 x 483 x 177 (D x W x H)

Complete systems would comprise of:

  • Sample lines
  • Automatic calibration units
  • Instrument air drying system
  • Sample extraction and conditioning probe (with integrated temperature, pressure and flow measurement)
  • Data acquisition & management system (WEX)

  • QAL 1 certified by the TÜV and the MCERTs to EN 15267-3
  • QAL3 compliance as defined by EN 14181
  • U.S. EPA approved as compliant with 40 CFR 60 ET 75

Related products


    The LCPD BOX is a full extractive sampling probe assembly which extracts the sample gas through a probe & heated filter to remove particulates.

  • DIL-1 / MS-1

    Ideal for mid-high to high concentrations, also for sampling locations in hazardous areas (ATEX).

  • SM-4

    Continuous, accurate and reliable measurement of total mercury emissions, even in very low concentrations and within complex matrices (SO2, NOx, HCl, etc.)

  • LAS 300 XD

    In-situ & non-invasive measurement of NH3 & H2O, HCl & H2O, HF, low or high concentrations of CO and O2

  • SEC™ BOX

    The dry extractive SEC™ system dries the gas sample at the sampling point, eliminating the necessity of an expensive heated sampling line.

  • WEX

    MCERTs certified software for emission data acquisition, processing and regulatory reporting


Compare up to 5 products Show