Approved Flue Gas Velocity CEM for stack velocity, volumetric flow and pollutant mass release calculations when linked to Gas and Dust CEMS
Typical Applications:
APPLICATION EXAMPLE:
| TECHNICAL SPECIFICATIONS | |
|---|---|
| Measured parameters | Flue-gas velocity |
| Technology | ProPitot™ Averaging Pitot |
| Measurement/Monitoring capability | 3 – 50 m/s* |
| Stack/Duct diameter suitability | up to 8m |
| Flue gas temperature | up to 800°C |
| Baghouse | YES |
| Cartridge Filter | YES |
| Ceramic Filter | YES |
| Coalescent Filter | YES |
| Cyclone | YES |
| Electrostatic Precipitator (ESP) | YES |
| Wet Electrostatic Precipitator (WESP) | YES |
| Wet Scrubber | YES |
| Sensor variants | Stainless Steel |
| QA checks | YES |
| TECHNICAL DATA | |
|---|---|
| Measurement capability | 3 – 50 m/s |
| Resolution | 0.1 m/s |
| Sensor Variants | 0.6m, 1.0m, 1.5m probe lengths |
| Sensor Material | 316 Stainless Steel |
| Stack Temperature Ranges | -20°C – 800°C |
| Functionality and QA Checks | Manual reference checks |
| Data Output | RS485 (Modbus) output to Controller |
| Enclosure Protection Rating | IP65 |
