Technology for dust concentration measurement after Electrostatic Precipitators or in large stacks

𝘋𝘺𝘯𝘢𝘮𝘪𝘤𝘖𝘱𝘢𝘤𝘪𝘵𝘺™ Ratiometric Opacity

DynamicOpacity™ Ratiometric Opacity technology provides a rugged solution to dust concentration measurement for the dust loadings found after Electrostatic Precipitators or in large stacks in Power, Steel, Cement Plant.

Its ratiometric measurement algorithm provides automatic self-compensating contamination elimination and therefore a rugged alternative to opacity monitoring in industrial applications regulated in terms of mg/m3 instead of historical opacity (colour).

    Core Features of the Technology are:

  • Ratiometric measurement permits accurate measurement when lens contaminated up to 90%.
  • Instrument can measure in both DynamicOpacity™ and opacity mode and provide concentration and opacity outputs
An LED source shines light through the particulate in a stack and the variation in the amount of transmitted light is measured by a receiver mounted on the opposite side of the stack. The variation derives from temporal distributions of particulate which attenuates the light beam. The instrument calculates the dynamic response (ratio of light variation to light intensity) which, for appropriate applications, is proportional to dust concentration and can be calculated in mg/m3 by reference to an iso-kinetic or gravimetric test.

DynamicOpacity™ Ratiometric Opacity

  • Compared to Opacity systems, DynamicOpacity™ systems are far less susceptible to errors caused by lens contamination. In practice, this means they need far less instrument maintenance and smaller air purging systems.
  • Due to its ratiometric algorithm, DynamicOpacity™ is much less subject to misalignment.
  • Compared to other ratiometric opacity systems, the instruments use an optimised frequency bandwidth which improves the quality of the dust measurement to be accurate enough to pass TUV and MCERTS approvals.
ENVEA’s DynamicOpacity™ instruments are available with a full range of quality assurance features and options, some of which are unique and patented by the company:

  • Automatic electronic Opacity zero and span checks performed by varying the light intensity in the transmitter head.
  • Automatic electronic DynamicOpacity™ zero and span checks, to test scintillation count at zero and full scale.
  • Optional hand held external Electronic Audit Unit for zero and linearity checks
  • Comms check, to test control unit correctly communicating with and reading dynamic opacity readings from the sensor(s).