Generation of mercury calibration gas

MC 3000

The MC-3000 generates a continuous stream of a mercury vapor loaded gas in order to check or calibrate mercury analyzers

An exactly adjustable carrier gas stream (normally air or nitrogen) is loaded with mercury in a first step.

In a second step the gas is supersaturated by cooling. Subsequently the excess mercury is condensed in a special cell to get exact saturation. The gas is then diluted, the dilution ratio is continuously adjustable in order to obtain concentrations within a specific range.

Add to Compare
  • Generates elemental mercury vapor
  • Continuous operation
  • Approx. 10 to 500 µg/m³ Hg°
  • Compact sized and portable
  • No permeation principle – no need to calibrate the calibrator
  • Microprocessor controlled
    Suitable for all applications where a gas stream with a preset and constant mercury concentration is needed
Technical Specifications
Range of concentrations approx. 10 to 500 µg / m³ Hg°
Generated calibration gas flow 1 to 9 l/min, depending on conc.
Carrier gas Air, Nitrogen
Carrier gas flow max. 12.5 l(min)
Carrier gas pressure 1 to 3 bar
Cleansing of carrier gas builtin particular filter (0.2 µm )
Mercury absorption filter sulphurized activated carbon at outlet
Temperature sensors Pt-100 with 0.01 °C accuracy
Flowmeter electronic mass flow controller (MFC)
Connectors for tubing 4mm i. d. / 6mm o. d.
Technical data
Power supply 230 VAC / 50 Hz (110 VAC / 60 Hz option)
Power consumption 30 VA
Dimensions (W x H x D) 45 x 18 x 27 cm
Weight approx. 5 kg
  • Our products are manufactured according to the ISO 9001 quality regulations.
  • CE approved

Related products

Produits apparentés

Verwandte Produkte

Prodotti correlati

Productos relacionados

相关产品

Produtos relacionados

Сопутствующие товары

QUOTE DEVIS ANGEBOT OFFERTA COTIZACIÓN 报价 COTAÇÃO ЗАПРОС ЦЕНЫ CONTACT CONTACT KONTAKT CONTATTI CONTACTO 联系我们 CONTATO КОНТАКТЫ
Go to Top