- 无接触
- 微波测量气动滑槽中的填充高度
- 4 . . . 20 mA 流量趋势信号
- 快速识别流动/无流动状态
- 易于安装
- 水泥
- 沥青
- 矿物质
- 钢铁
Application examples:
Cement flow rate after cyclone separator
Flow monitoring of cement in air slides
- 无接触监测物料流动
- 安装简单，安装在在气动溜槽上
- 4 . . . 20 mA流量趋势信号
- 非接触测量
| Sensor Technical Data | |
|---|---|
| Housing material | Stainless steel 1.4571 |
| Protection Type | IP 65 |
| Process temperature | -20…+80 °C -20…+220 °C (with process adapter) |
| Ambient temperature | -20…+60 °C |
| Working pressure | Max. 1 bar |
| Power supply | 18…24 V DC / AC powered by transmitter |
| Measuring frequency | 24.125 GHz; ± 100 MHz |
| Transmitting power | Max. 5 mW |
| Weight | 1.0 kg |
| Dimensions | Enclosure: length of 216 mm / diameter of 52 mm Thread: length of 30 mm / diameter of G 1½” |
| Transmitter Technical Data | ||||
|---|---|---|---|---|
| Transmitter (DIN Rail) | Transmitter (field housing) | |||
| Power supply | 24 V DC ±10 % | 110 / 230 V AC 50 Hz (optional 24 V DC) |
||
| Power consumption | 20 W / 24 VA | |||
| Protection type | IP 40 to EN 60 529 | IP 65 to EN 60 529/10.91 | ||
| Ambient operating temperature | -10 … +45 °C | |||
| Dimensions (W x H x D) | 23 x 90 x 118 mm | 258 x 237 x 174 mm | ||
| Weight | Approx. 172 g | Approx. 2.5 kg | ||
| DIN rail fastening | DIN 60715 TH35 | / | ||
| Cable screw connectors |
/ | 3 x M20 (4.5 – 13 mm Ø) | ||
| Connection terminals cable cross-section |
0.2-2.5 mm2 [AWG 24-14] | |||
| Current output | 1 x 4 … 20 mA (0 … 20 mA), load < 500 Ω |
3 x 4 … 20 mA (0 … 20 mA), load < 500 Ω |
||
| Interface | RS 485 (ModBus RTU) / USB | |||
| Pulse output | Open collector – max. 30 V, 20 mA | |||
| Relay contact | Max. rated load: 250 V AC Max. peak current: 6 A Max. rated load 230 V AC: 250 VA Max. breaking capacity DC1: 3/110/220 V: 3/0.35/0.2 A Min. switching load: 500 mW (10 V / 5 mA) |
|||
| Data backup | Flash memory | |||
• Can only be used in combination with MSE 300. For older versions, please contact us.
相关产品
Produits apparentés
相关产品
相关产品
相关产品
-
> 干燥散装固体的质量流量测量
MaxxFlow HTC
> 浓相输送流量测量
DensFlow HP
Previous NextCloseTest CaptionTest Description goes like this
