QAL1 Forward Scatter Particulate CEM

PCME QAL 181

QAL1 Approved ProScatter™ particulate CEM providing high quality emission measurement of low dust concentrations from dry industrial processes

  • Robust design with no critical moving parts
  • Available for use in high-temperature stack conditions and Ex hazardous zones
  • Easy to fit multi-patterned flange
  • Adjustable monitoring depth to ensure sampling in the most representative part of the flow path
  • Enhanced measurement due to reduced cross sensitivity to particle type and size
  • ProScatter® technology offers enhanced measurement due to reduced cross-sensitivity of particle type and size
  • Easily audited with manual filters
  • Stacks after bag filters, cartridge filters, cyclones, electrostatic precipitators, no filtration
  • Non-condensing / dry flue gases
    Typical Applications:

  • Incineration
  • Metals (eg Steel/Aluminium)
  • Minerals (eg Cement/Gypsum)
  • Chemicals (eg TiO2 / Refinery)
  • Power Generation Plant (eg Coal/Biomass)
Technical Specifications
Measured parameters Dust
Technology ProScatterTM Forward Scatter
Measurement/Monitoring capability 0-1000 mg/m³*
Stack/Duct diameter suitability up to 8m
Flue gas temperature up to 500°C
Baghouse YES
Cartridge Filter YES
Ceramic Filter YES
Coalescent Filter YES
Cyclone YES
Electrostatic Precipitator (ESP) YES
Wet Electrostatic Precipitator (WESP) /
Wet Scrubber /
Sensor variants Stainless Steel
Hastelloy® corrosion resistant
QA checks YES
*Application dependant
Technical data
Measurement capability 0 – 1000 mg/m3
Certification Range 0 – 15 mg/m3
0 – 100 mg/m3
Resolution 0.01 mg/m3
Sensor Variants Stainless Steel (standard). Corrosion resistant Hastelloy (option)
Stack Temperature Ranges 0-250°C. Up to 500°C option
Functionality and QA Checks Automatic zero and upscale checks QA data logging
Data Output RS485 (Modbus) output to Controller
Air Purge requires continuous air purge
Enclosure Protection Rating IP66
  • MCERTs and TÜV (UBA) certified to EN15267-3
  • QAL1 as defined by EN14181
  • QAL3 compliance to EN14181
  • GOST / EAC Approved
  • Ex Zone 2

Related products

QUOTE CONTACT

Compare up to 5 products Show

Previous Next
Close
Test Caption
Test Description goes like this

SOLUTIONS

SERVICES & SUPPORT

NEWS & EVENTS

ABOUT US

CONTACT

This site uses cookies. By the further use you hereby agree. For detailed information, please refer to the Cookies. Ok