RICHIESTA DI INFORMAZIONI – Mass Flow measurement

This questionnaire simplifies the definition of your application and the selection of the suitable product for you and us. Please enter the listed parameters as far as they are known.

INFORMATIONS CONTACT
Company*
Email*
Name*
Surname*
City*
Country/State*
Telephone*
Fax
PRODUCT SELECTION
SolidFlow 2.0MaxxFlow HTCPicoFlowDensFlowDensFlow HPAirFlow P
APPLICATION REQUIREMENTS
Nominal flow rate (kg/h)
Desired accuracy (+/-%)
Flow rate min. (kg/h)
Flow rate max. (kg/h)
Pressure inside the pipe min. (bar)
Pressure inside the pipe max. (bar)
Type of conveying (A)
Type of conveying (B)
If discontinuous, batch length
Material velocity [m/s]
Air flow rate for pneumatic conveying min. (m³/h)
Air flow rate for pneumatic conveying max. (m³/h)
Ambient temperature min. (°C)
Ambient temperature max. (°C)
Ex-hazardous area (ATEX)
Ex-zone (inside/outside):
Can a reference measurement be taken for calibration purposes?
Reason of measurement
CHARACTERISTICS OF THE MATERIAL
Type of material
Will different materials be measured ?
If yes, amount of types
Bulk density min. (kg/m³)
Bulk density min. (kg/m³)
Grain size min. (mm)
Grain size max. (mm)
Residual moisture min. (%)
Residual moisture max. (%)
Temperature of the material min. (°C)
Temperature of the material max. (°C)
Is the material abrasive ?
Does the material cake ?
Angle of repose (°)
MOUNTING POSITION OF THE SENSOR
Type of conveying
Type of pipe
Diameter / Height of pipe (mm)
Pipe material
Conveying device before the sensor
Conveying device after the sensor
Total available height to install the sensor (mm)
The contact data you enter will only be stored and processed to answer your enquiry in accordance with our data protection regulations. We do not pass on your data to third parties. You can object to the storage of your personal data at any time.
I hereby confirm that I have read and accept the privacy policy.