Contrôle du flux de matière en aéroglissière
Capteur micro-ondes pour la mesure sans contact du flux de matière en aéroglissière. Facile à installer, donne l’information de tendance via la sortie 4… 20mA.
Le SlideControl surveille sans contact le débit de matière dans les aéroglissières. En utilisant la technologie micro-ondes, le SlideControl mesure la distance qui le sépare de la matière qui s’écoule.Il détermine ainsi la hauteur de remplissage de l’aéroglissière et la transmet par un signal 4…20 mA.
Contrôle du flux sans contact
- Features & Benefits
- Main applications
- Technical Specifications
- Technical Data
- Mounting Installation
- Downloads
- Microwave sensor for contactless material flow measurements in air slides.
- Fast recognition of Flow/No Flow conditions
- Easy to install
- No installations into the process
- 4 . . . 20 mA trend signal for the flow rate
- Easy retrofitting
- Cement
- Asphalt
- Minerals
- Steel
- Monitors the material flow in the slide without any contact
- Easy and retrofit installation on the air slide
- 4 . . . 20 mA-trendsignal for the flow rate
- Contact-free
Sensor Technical Data | |
---|---|
Housing material | Stainless steel 1.4571 |
Protection Type | IP 65 |
Process temperature | -20…+80 °C -20…+220 °C (with process adapter) |
Ambient temperature | -20…+60 °C |
Working pressure | Max. 1 bar |
Power supply | 18…24 V DC / AC powered by transmitter |
Measuring frequency | 24.125 GHz; ± 100 MHz |
Transmitting power | Max. 5 mW |
Weight | 1.0 kg |
Dimensions | Enclosure: length of 216 mm / diameter of 52 mm Thread: length of 30 mm / diameter of G 1½” |
Transmitter Technical Data | ||||
---|---|---|---|---|
Transmitter (DIN Rail) | Transmitter (field housing) | |||
Power supply | 24 V DC ±10 % | 110 / 230 V AC 50 Hz (optional 24 V DC) |
||
Power consumption | 20 W / 24 VA | |||
Protection type | IP 40 to EN 60 529 | IP 65 to EN 60 529/10.91 | ||
Ambient operating temperature | -10 … +45 °C | |||
Dimensions (W x H x D) | 23 x 90 x 118 mm | 258 x 237 x 174 mm | ||
Weight | Approx. 172 g | Approx. 2.5 kg | ||
DIN rail fastening | DIN 60715 TH35 | / | ||
Cable screw connectors |
/ | 3 x M20 (4.5 – 13 mm Ø) | ||
Connection terminals cable cross-section |
0.2-2.5 mm2 [AWG 24-14] | |||
Current output | 1 x 4 … 20 mA (0 … 20 mA), load < 500 Ω |
3 x 4 … 20 mA (0 … 20 mA), load < 500 Ω |
||
Interface | RS 485 (ModBus RTU) / USB | |||
Pulse output | Open collector – max. 30 V, 20 mA | |||
Relay contact | Max. rated load: 250 V AC Max. peak current: 6 A Max. rated load 230 V AC: 250 VA Max. breaking capacity DC1: 3/110/220 V: 3/0.35/0.2 A Min. switching load: 500 mW (10 V / 5 mA) |
|||
Data backup | Flash memory |
Once the sensor has been installed and electronically connected, it is possible to measure the filling height via the service opening of the mounting plate, for example with a dip stick. |