Contrôle du flux de matière sur conduites flexibles
Le capteur FlowJam T a été spécialement développé pour la mesure de flux de matière sur des conduites flexibles.
Il peut être utilisé sur tous types de conduites flexibles en matériau électriquement non-conducteur, comme le plastique ou le caoutchouc, avec des diamètres extérieurs compris entre 4 et 25 mm.
Exemple d’utilisation : détection de flux de peinture en poudre dans le secteur automobile
- triboelectric measurement
- free cross section
- Plug & Play
- trend monitoring for throughput
- suitable for pipelines with outer diameter: 4 … 25 mm
- compact device
- easy retrofitting
- Powder coating
- Water cutting
- Sand blasting
- 3D printing
Technical Specifications | |
---|---|
Material to detect | Dust, powders or granulates |
Working principle | Triboelectric |
Process pressure | Independent |
Process temperature | -20 … +60 °C |
Mounting | Clamp-on |
Type of Conveying | In flexible hoses |
Flow rates | No limit |
Pipe diameter/detection range | 4 to 25 mm |
ATEX rating | No |
Output | Relay, 4…20mA Trend |
Sensor Technical Data | |
---|---|
Power supply | 24 V DC |
Connection | M12-Plug |
Housing material | Aluminium |
Protection type | IP 64 |
Process temperature | -20 … +60 °C |
Ambient temperature | -20 … +60 °C |
Analogue output | 1 x 4 … 20 mA (0 … 20 mA), load < 500 Ω (Active) |
Relay output | NO (make contact); max. 250 V AC / 0.5 A; 30 V DC / 1 A |
Possible outer diameter | 4 to 25 mm |
Dimensions | Width: 62 mm, Depth: 62 mm, Height: depend on outer diameter Ø (with Ø 8 mm the height is 75 mm) |
The material movement in non-metallic pipelines is displayed at the analogue output as a trend and at the relay output as switching state.
Via the trend output can be displayed, for example, whether more or less material through the tube is conveyed. The material flow can also be observed for uniform distribution. By means of the relay contact an additional information about Flow/NoFlow can be output.
System:
The FlowJam T is a compact device and is connected via an 8-pin plug. For parameterisation of the sensor, a Modbus-USB converter and software could be provide.