𝘌𝘭𝘦𝘤𝘵𝘳𝘰𝘋𝘺𝘯𝘢𝘮𝘪𝘤™ Approved Particulate CEM

STACK 990

TÜV approved particulate monitor providing high quality emission measurement for low dust concentrations from dry industrial processes including Baghouses and Cartridge Filters

  • Robust design unaffected by product build-up on the sensor rod
  • No additional services such as air purge required, providing lower cost of ownership
  • Simple maintenance no requirement for specialist service personnel
  • Networking of sensor channels and providing multiple inputs and outputs for external connections
  • Extensively used for measurement (mg/m3) and leak location in bag filter stack applications
  • Advanced sensor design includes drift checks (zero and span) and contamination checks
  • Passive/Active and fully insulated sensor options available for applications with stack condensation and damp particulate prevents potential short circuit to stack wall
  • Stacks after bag filters, cartridge filters, cyclones, electrostatic precipitators, no filtration
  • After process dryers
  • Variable velocities within range 8 – 20 m/s
    (typical bag filter velocity ranges), constant velocity required outside this range
  • Non-condensing / dry flue gases
    Typical Applications:

  • Incineration
  • Metals (eg Steel/Aluminium)
  • Minerals (eg Cement/Gypsum)
  • Chemicals (eg Detergent / Carbon Black)
  • Power Generation Plant (eg Coal/Biomass)
Technical Specifications
Measured parameters Dust
Technology ElectroDynamic™ Advanced Probe Electrification
Measurement/Monitoring capability 0-1000 mg/m3*
Stack/Duct diameter suitability up to 8m
Flue gas temperature up to 800°C
Baghouse YES
Cartridge Filter YES
Ceramic Filter YES
Coalescent Filter YES
Cyclone YES
Electrostatic Precipitator (ESP) /
Wet Electrostatic Precipitator (WESP) /
Wet Scrubber /
Sensor variants Stainless Steel
Fully insulted PTFE coated
Passive/Active
QA checks YES
*Application dependant
Technical data
Measurement capability 0 – 1000 mg/m3
Sensor Variants 316 Stainless Steel / Fully insulated PTFE coated (option) / Passive/Active (option)
Stack Temperature Ranges 0 -250°C up to 800°C (option)
Functionality and QA Checks Automatic zero and span / Short circuit check / Contamination check / Drift checks
Data Output RS485 (Modbus) output to Controller
Air Purge option
Enclosure Protection Rating IP66
  • TÜV approved BlmSchV 13, 17 & 27
  • Ex Zone 2, 20
  • US EPA MACT Compliant BLD

Cases Studies