Mesure des expositions aux poussières
L’AirSafe PM permet une surveillance continue et précise de l’exposition aux poussières dans l’air ambiant intérieur : salles de contrôle, zones de stockage, chaufferies, postes de travail, installations
Adapté aux mesures à haute et basse gamme, l’AirSafe PM peut être utilisé pour la surveillance de l’exposition à la poussière sur le lieu de travail afin de détecter et de suivre les limites d’exposition aux particules et les dépassements de seuils.
Les services HSE de votre site peuvent utiliser les données de mesure pour suivre la qualité de l’air sur le site et mettre en place les mesures requises pour assurer un environnement de travail sûr.
Suivi en continu de l’exposition professionnelle aux particules PM1, PM2.5, PM4.25, PM10 et TSP en ambiances de travail
- Indoor Monitor for Dust Exposure
- Precise PM1, PM2.5, PM4.25, PM10 and TSP monitoring
- Separate measurement of the E and A dust fractions
- Applicable in process areas and industrial environments
- Able to provide a fast detection of fine process leak
- Wireless communication and user friendly interface with datalogging
- Up to 20 mg/m3 dust concentration
- Compliance with EN 481 and TRGS 900
- Indoor Monitor for Dust Exposure for Cement plants
- Foundries
- Wood workshops
- Incineration plants
- Logistic warehouses
- Laboratories
- Breakrooms
- Changing rooms
- Office areas
Technical Data Sensor | |
---|---|
Particulate matter measurement range | Mass concentration of E dust Volume concentration of A dust PM1 PM2.5 PM4.25 PM10 TSP |
PM level range | E dust: 0 … 20 mg/m3 A dust: 0 … 2 mg/m3 |
Data processing | Long term value: Mean value of 8 h Short term value: Mean value of 15 min Instantaneous value: Only sampling time |
Tracking of limit violations | Counting of phases with violations of long term limits Counting of recovery phases inbetween them |
Humidity compensation | Yes |
Dust material density adjustment | Yes |
Limits for dust concentration | Long term dust concentration limit for E dust Long term dust concentration limit for A dust Instantaneous dust concentration limit for E dust Instantaneous dust concentration limit for A dust |
Datalogger | Yes (on AirSafe PM WIFI Version) |
Communication | 2 x 4 … 20 mA analog output (active) Modbus 485 RTU or TCP/IP WLAN (on AirSafe PM WIFI version) |
Relay | 1 |
Voltage | 24 V DC |
Power | 12 W |
Current | 0.5 A |
IP rating | Sensor: IP20; Electronic: IP40 |
Ambient temperature | -10 … +50 °C |
Dimensions | 290 x 260 x 110 mm (L x B x H) |
Weight | Approx. 2.5 kg |
monitoring as part of exposure and health safety limit monitoring or for fine process leak detection.
The AirSafe PM can be easily mounted to most surfaces and areas, such as:
- Process areas
- Storage rooms
- Laboratories
- Breakrooms
- Changing rooms
- Office areas
- Other footfall areas of health and safety exposure concern
- Areas of air quality monitoring requirements
Install the AirSafe PM as near as possible to air intakes, areas of air movement, and areas of static air/settlement where people work. When positioned near the ventilation and filtration apparatus, the AirSafe PM can be used to monitor the effectiveness of the ventilation and filtration process.
When a process need to be monitored to detect minor dust leak, the sensor should be installed in the vicinity of possible leakage.