Système d'échantillonnage des gaz de cheminée
SEC™ BOX
Le système d’extraction à sec SEC™ sèche l’échantillon de gaz au point de prélèvement, éliminant ainsi la nécessité d’une ligne d’échantillonnage chauffée.
Technique exclusive de séchage par perméation, conçue pour presque toutes les conditions de prélèvement de gaz. Idéale pour le prélèvement de gaz corrosifs
En option : Capteurs de température et de vitesse intégrés ou débitmètre STACKFLOW 200 sur la même bride.
À utiliser avec des analyseurs non chauffés tels que le MIR 9000, MIR 9000e, MIR 9000CLD, MIR 9000ASD.
- Features & Benefits
- Main applications
- Technical specifications
- Technology
- Approvals & Certifications
- Downloads
The SEC sampling system uses the Cold Dry Extractive method (Dry Basis Analysis).
- Sampling probe equipped with double stage particulate filtration
- Direct span gas injection for a complete system calibration
- Permeation-based drying system avoids loss of highly condensible gases (e.g. HCl, SO2,NO2 and HF)
- Automatic & periodic back-purge functionality for longer maintenance intervals
- Clean & dry sample transferred via unheated line (up to 100m distance) at ambient air temperature
- Large selection of probes available (depending on process conditions: stack diameter, gas temperature, water content, particulate concentration)
- Heated probe with choice of materials & lengths
- Sludge Incineration
- Gas turbines
- Power Plants
- Boilers
- Paper Mills
- Cement
- Boilers
- Paper Mills
- Glass, Petrochemical & Chemical Industry
- Waste Incineration( Municipal Energy from Waste or Industrial)
| Technical Specifications | |
|---|---|
| Sample gas max. dew point | 75°C (45% H2O) |
| Primary filter (in the probe) | 20 μm (depending on probe type) |
| Fine filter (in the box) | 0.5 μm |
| Sample flow rate | 20 to 40 l/h |
| Dimensions | 400 x 600 x 200 mm (W x h x D) |
| Weight | 15 kg (IP65 enclosure) |
| Power supply | 230 V/50Hz or 110V/50-60Hz |
| Consumption | 500 VA |
| Operating temperature | -10°C to + 40°C (up to 50°C with Vortex cooler option) |
| Flange | DN100/PN20 – 4’’/150 lbs (others upon request) |
Cold Dry Extractive (Dry Basis Analysis)
The gas sample is extracted and conditioned before transport, in order to have all moisture and condensible components removed prior to its analysis. Upon arrival
to the analyzer, the sample is clean, dry, at ambient temperature & water interference-free.
The gas sample is extracted and conditioned before transport, in order to have all moisture and condensible components removed prior to its analysis. Upon arrival
to the analyzer, the sample is clean, dry, at ambient temperature & water interference-free.
COMPLIANCE WITH: EU Regulation IED (WID / LCPD / MCPD directives) and US EPA (40 CFR 60 & 75)
