Analyse rapide du mercure dans les applications analytiques de laboratoire
L’analyseur de laboratoire LabAnalyser 254 est utilisé pour déterminer la quantité de mercure présente dans des échantillons aqueux et des digestions aqueuses.
Contrairement à un AAS multi-éléments typique, le LabAnalyzer 254 est spécialement conçu pour mesurer le mercure élémentaire. Cela permet d’obtenir des performances optimales dans les applications analytiques. L’utilisation d’une lampe à mercure hautement stable spécialement développée en liaison avec des capteurs UV commandés par thermostat permet d’obtenir une limite de détection de quelques ppt de mercure.
- Features & Benefits
- Main applications
- Technical Specifications
- Technical Data
- Approvals & Certifications
- Downloads
- the optical system does not require any readjustment
- Short analysis time
- Low reagent consumption
- Automatic zero adjustment
- Memory effects are minimized and a high sample throughput is possible thanks to specially selected materials for sample gas conducting components and heating of the optical bench.
- For analyses according to DIN 38406-12 / EPA 7470A / EPA 7471A)
- Measuring range:0.01 ppb … 10 ppb (10 ng/l to 10 µg/l)
- Hg trap: Mercury vapors cannot escape into the lab
- Upgradable to VM-3000 Mercury Vapor Monitor
- Software for data acquisition, data visualisation and storage
- Automatic Calibration Module
- Special version with UT-3000 Ultratracer available
- Water samples: drinking water, waste water, ground water, surface water, sea water
- Soil and sludge samples
- Geological sample material
- Waste samples: glass, construction rumble, contaminated liquids, wood
- Incineration plant monitoring: smoke gas scrubber water, smoke gas analysis (e.g. to VDI 3868-2 VE)
- Monitoring of foodstuffs
- Clinical samples: urine, saliva
- Chemical industry: environmental protection and quality control
- Petrochemical industry
- Scientific research
Technical Specifications | |
---|---|
Measuring principle | cold vapor atomic absorption (CVAAS) at 253.7 nm; Peak method |
UV-Source | Electrodeless low pressure mercury lamp (EDL) |
Stabilization method | Reference beam method |
Optical cell | Fused silica (Suprasil), l: approx. 230mm, heated approx. 45° |
Sample volume | 2 – 10 ml |
Measuring ranges | liquid sample: 0,01 to 10 μg/l at 10 ml sample volume; solid sample: 0,1 ng/g to 0,1 μg/g at 1 g sample weight |
Sensitivity | approx. 5 ng/l resp. 0.05 ng absolutely |
Reducing agent | Tin-II-chloride or sodiumborohydride |
Technical data | |
---|---|
Signal outputs | analogue: 4-20 mA; serial: RS 232 / USB |
Power supply | 230 VAC / 50 Hz (110 VAC / 60 Hz option) |
Power consumption | 100 VA |
Dimensions (W x H x D) | Photometer: 45 x 15 x 35 cm; Reactor: 24 x 48 x 27 cm |
Required floor space | approx. 70 x 50 cm (W x D) |
Weight | approx. 10 kg |
- Our products are manufactured according to the ISO 9001 quality regulations.
- CE approved